Gear Oils

SRS Getriebefluid BOS is a fully synthetic hypoid gear oil for heavy duty axle drives. It can be used as running in and regular operating oils in mixed car fleets for type reduction in all drive axles API GL5 requirements. It is approved for use in BMW axle drives without multiplate and self-locking differentials or with viscose locking differentials.

Specifications
API         GL 5

Approvals
BMW
MAN 342 type SL
+ oil drain intervals up to 500.000 km
ZF TE-ML 05B, 12B, 17B, 19C, 21B

SRS Getriebefluid HGS is a semi-synthetic hypoid gear oil for heavily loaded axle drives. It was developed for highly stressed hypoid-geared drive axles as well as for bevel gears and spur gears, steering boxes and non-synchronized gearboxes of motor vehicles and work machines.

Specifications
API         GL-5

 

SRS Getriebefluid 5 L is a synthetic gear oil with additives matched to the requirements of gear boxes. The viscosity setting of SAE 75W-90 reduces sluggishness at low temperatures, particularly in 5-speed gear boxes. At the same time its distinctive high-temperature viscosity prevents noise development at high temperatures.
SRS Getriebefluid 5 L is suitable for use in all passenger car transaxle blocks with in-line gear boxes (Audi, VW, i.e.). Its high degree of wear protection also effectively protects the customary hypoid drives with minor pinion offsets in these gear boxes.

Specifications
API        GL 4 plus

Approvals
VW 501 50

SRS Wiolin RSH is prescribed for heavy duty drive axles with hypoid gears and self-locking differentials. It contains special ingredients for limiting slip (Limited Slip = LS) and prevents noise development in curves. It satisfies all performance requirements set for hypoid gears with multiplate locking differentials and can also be used for type reduction in all drive axles with API GL 5 requirements.

Specifications
API         GL5 LS

Approvals
MIL-L-2105 B/C/D
Ford M2C 104 A
ZF TE-ML 05C, 12C, 16E, 21C

SRS Getriebefluid SML is a high-performance multifunction gear oil for universal application in commercial vehicle gearboxes, auxiliary drives and rear axles, including heavily loaded hypoid drive axles. It is manufactured from selected mineral oils and specially matched additives. The viscosity range of SAE 80W-90 guarantees both good flow behaviour at low temperatures and high lubrication security at high temperatures.

Specifications
API         GL-4 and GL-5, MT-1
SAE         J 2360 (MIL PRF 2105 D/E)

Approvals
MAN 341 Type E 2 (extended oil drain intervals)
MAN spec. M 3343 Type M (extended oil drain intervals)
Mercedes-Benz 235.0
Scania STO 1:0
ZF TE-ML 02B, 05A, 12E, 16B, 17B, 19B, 21A
Mack GO-J
Arvin Meritor Transmission 076-A and 076-D
DAF
Iveco
Renault

SRS Wiolin RSG is a high performance gear oil, for gear boxes for extreme oil change intervals. The viscosity was adjusted so as to ensure a good cold flow behavior and high temperature performance. It is a EP multi-purpose gear oil which can be used for all purposes in servicing gear Boxes (with and without synchromesh), transfer gear boxes, various steering gears and normal duty drive axles – particularly passenger car transaxle systems. It is also used in wheelset gearboxes of the German Federal Railways (Deutsche Bahn).

Specifications
API        GL-4

Approvals
MAN 341 Type E2 and Type Z2
ZF TE-ML 02B, 17A
Mercedes-Benz 235.5

SRS Wiolin Hypoid gear oils are intended for very heavy duty drive axles with hypoid gears and for bevel and spur gears, steering gears and non-synchromesh gear boxes in motor cars and machines. They are made of selected base oils with matching additives. Their viscosity settings are chosen to ensure both good flow-on characteristics at low temperatures and high lubrication safety at high temperatures.

Specifications
API        GL 5
MIL        L-2105 C/D

Approvals
Mercedes-Benz 235.0
Ford SQM-2C-9002 AA
MAN 342 Type 1
ZF TE-ML 05A, 07A, 16B, 16C, 16D, 17B, 19B, 21a
Volvo 97310
DAF
Renault